Washing Machine Water Damage Prevention San Diego CA

Replace rubber washing machine supply lines with the metal covered braided hoses

A leading reason for washing machine water damage in houses is failure of the flexible rubber hoses that connect the washing machine to the cold and hot supply of water lines. If a washing machine is neglected and the valves can not be closed when a hose fails, the discharge of water can be ravaging. It can collapse floors and flood locations below and adjacent to the laundry room. Implementing the ideas below can help secure your house from the danger of water damage.

Hose Failure Causes Washing Machine Water Damage

washing machine water damage San Diego CAThe hoses that come with brand-new washing machines are typically of low quality, generally lasting no more than four or 5 years, and can fail without warning. Washing device hoses normally fail where the metal coupling crimps the hose end. Over time, flowing water sharpens the metal edges, which can cut the inside of the hose, resulting in burst. Keeping the washer valves open when the washer is not in use is also a reason for hose and valve failure, as continuous high water pressure is put on these parts.

Inspect Hoses Every Month

Inspect that hoses are securely connected to the water system valves.

Try to find indicators of unusual wear like dryness, cracking or inflamed points, and replace instantly if cut, frayed or harmed.

There might be signs of rust, corrosion, or leaking around the hose ends prior to they rupture.

Ensure your washing device is at least 4″ from the wall to prevent the hoses from flexing and kinking. This can restrict water circulation and enhance the pressure on the hose.

Likewise examine the drain hose at the back of the washer, which is inserted into the main drain line. Make certain the hose is protected and will not remove as the washer agitates or drains.

Replace and Upgrade Hoses

Change both the hot and cold washer hoses every 5 to 7 years, even if they appear to be in good condition. Consider updating cleaning device hoses to stainless steel braided hoses with auto-shutoff ports. To further avoid problems, practice turning off your hose valves when the washing device is not in use, or install an automatic shut-off valve. Never leave your washer on when you’re sleeping or going of your house. If your home will certainly be unoccupied for more than a couple of days, take some time to shut down the primary water valve. For longer moments, ask a pal, relative, or next-door neighbor to check your house regularly.